CLEAR Edge Glued Solid Radiata Pine Panel
Solid single layer wood board made up of pieces of wood (strips) glued together edge to edge and or on edge based on an aqueous dispersion-based adhesive of polyvinyl acetate. The manufacturing process is completed by longitudinal cut of the piece to normalized length in addition to the item’s sanding. The international term that used is the acronym SWP (S = solid; W = wood; P = panel).
A/B Grade: main face is free of knots and back face may include some (always treated).
- Scientific name: Pinus Radiata D. Don
- Common name: Radiata Pine, Insignis Pine
- Grain: Straight, except for rings close to the pith
- Defects: Knots, normally healthy ones
- Texture: Homogenous and fine
- Scent: Slightly sappy
- Moisture content: 12 %
- Thermal conductivity: 0,104 λ (W/mK)
- Nominal density: 445 Kg/m3
- Permeability: Retention > 240 kg/m3
- Shrinkage coefficient: Volumétrica (14,5 %); Tangencial (7,4 %); Radial (4,2 %)
- Durability: Category 4
Taxonomic Description of the Wood
- Domain: Eukaryota
- Kingdom: Plantae
- Division: Pinophyta
- Class: Pinopsida
- Order: Pinales
- Family: Pinaceae
- Genus: Pinus
- Species: Radiata
- Janka Hardness: 3600 N
- Modulus of rupture: 816 Kg/cm²
- Modulus of elasticity: 80558 Kg/cm²
- Compression resistance: 347 Kg/cm²
- Alburnum: White – creamy
- Duramen: Light brown
- Knot: Chestnut-brown
Dimensions (Measurement values are indicated in mm)
- Lenght: 1000 – 1200 – 1400 – 1600 – 1800 – 2000 – 2200 – 2400 – 2440
- Width: 1220
- Thickness: 10 – 12 – 16 – 18 – 22 – 25 – 30 – 40
Consult other measurements
In accordance with The Spanish Association of Standardisation, the edge glued Radiata pine panels are classified as follows:
- Regarding the conditions in which it is utilized: SWP (1= dry )
- Regarding its mechanical properties: SWP 1 NS (NS= non- structural, non-structural application)
- Cutting: Easy
- Drying: Fast
- Planing: Easy
- Gluing: Easy
- Nailing and screwing: Easy
Conservation and Storage
Our experience with Radiata pine and the edge glued panel made of this raw material allows us to know the possible modifications or damage that the product might suffer in the event that a series of recommendations regarding basic conservation and storage were not taken into consideration to preserve its durability and stability.
In wanting to avoid warping of the panel or edging of the strips that are at the edges we suggest the following recommendations:
- Do not subject the plank to sudden temperature and or moisture changes. Wood is sensitive to variations in the stability of the atmosphere surrounding it.
- Avoid storing the panels of wood in direct contact with floors and walls.
- Keep the original packaging, which were provided with the goods whether it be one by one or altogether, avoiding contact with the atmosphere for a prolonged period of time if the goods have not been rearranged or moved from the initial positioning – once the piece which is going to be put to use has been removed.
- Apply varnish, lacquer, paint or similar chemical treatment or equivalent that enhances the resistance of the panel/board and is not incompatible, in accordance with the fact sheet provided by the manufacturer, with the wood in itself or the adhesive used to glue.